verhaal_joke-van-gorp--banner-

"Today, I get to do the job I was already looking forward to during my studies."

Olen | Tuesday, November 17, 2026

What began as an introduction to the lab during a career fair turned into a permanent position at Aurubis Olen. Today, Joke works as a Laboratory Technician, where she contributes to the quality of our copper products through precise analyses.

  • Joke Van Gorp
  • 22 years old
  • Laboratory technician
  • Working at Aurubis Olen since September 2024
  • Tell us, Joke, how did your story at Aurubis Olen begin?

During my first year of college, I visited Aurubis Olen during a career fair. We were given a tour of the lab, and I saw all kinds of measuring instruments that I found really interesting. I was immediately blown away. It was the first time I’d seen a lab in a real work environment, and I felt an instant connection.

Later, I asked if I could do an internship here. During my internship, I worked with XRF, among other things—a technique we use to analyze the composition of samples. For this, I developed a method for analyzing liquid copper samples. My internship went very well, and eventually, I was able to join the company as a permanent employee. It’s a journey I still look back on today with great pride and satisfaction!

 

  • What exactly does your job as a Laboratory Technician entail?

I analyze samples from production to check their quality. The results help us monitor the production process and make adjustments where necessary. The analyses we perform are essential for consistently guaranteeing the quality of our copper products.

I work mainly in the front section of the lab, where we quickly deliver results to departments such as Contimelt (where we melt the copper) and Contirod (where we cast copper wire). The samples are sent to us from production via an air-mail system. Depending on the analysis process, we have a result within about twenty minutes to three-quarters of an hour.

Safety is also an important part of my job. We process some samples in a small furnace heated to about 1,200 °C. For other analyses, we work with acids. That’s why we wear the necessary personal protective equipment, such as a lab coat and safety goggles, and always handle the equipment and materials with care.

 

  • What does an average workday look like?

I work in shifts: early, late, and day shifts. During the early shift, I first check to make sure the measuring instruments are working properly. Then I start on the samples that arrived overnight, and we perform the necessary checks. During the late shift, the focus is more on operating the measuring instruments and processing new samples. Sometimes we receive a high-priority sample. In those cases, it’s important that we work quickly and accurately so that production can be adjusted if necessary.

We’re also in regular contact with colleagues from production. This allows us to tailor the analyses to production needs and ensure that the results are available on time.

 

  • What gives you a sense of fulfillment at the end of a workday?

I get a real boost when I’m completely up to date. Especially during the early shift, it’s satisfying when the samples from the night before have been processed and everything has been properly followed up on. I also find it special that I’m able to do the job today that I was already looking forward to during my training. It’s nice to see how my interest in chemistry ultimately led to this position.

 

  • How would you describe the atmosphere within your team?

We’re a close-knit team of five colleagues. We work well together, help each other out, and there’s also room for humor and a little chit-chat. I appreciate that we’re open with each other. We can turn to one another with questions, and I learn a lot from my colleagues’ experience.

 

  • What skills are important in your role?

Accuracy is very important. We work with small variations and numbers that can have a major impact on production. That’s why I don’t just look at the result displayed by a device; I also constantly assess whether the measurement is reliable. In addition, analytical thinking is essential. You learn to interpret results, make connections, and determine when an analysis needs to be repeated. Technical insight also comes in handy, as you gain a deeper understanding of how the measuring devices work.

 

  • What opportunities do you have to learn and develop yourself further?

I’ve mainly learned about the specific measuring instruments and procedures through hands-on experience. I’ve received the necessary explanations and guidance, and I can always ask my colleagues questions.

In the meantime, I’ve also completed training to work in another section of the lab, where, among other things, we perform analyses related to electrolysis. This way, I’m gradually getting to know more areas of the lab. I find it interesting to perform analyses and to understand how the measuring instruments and the associated software work. So there’s still a lot for me to discover!

 

  • What makes working at Aurubis Olen interesting to you?

As a student, I deliberately chose chemistry because I enjoyed doing experiments and wanted to work in a lab. At Aurubis Olen, I can combine my passion for chemistry every day with a job that has a real impact on production.

Of course, the benefits package also plays a role, such as meal vouchers and bike leasing. For me, the combination of interesting challenges, great coworkers, and a competitive compensation package is a major plus. I started here as an intern, and even today I still get the chance to learn something new every day. That’s what makes it such a great place for me to work.

 

Looking for a new challenge? We look forward to getting to know you!
  • Apply quickly and easily online.
  • We would be happy to welcome you for an introductory interview. See you soon?
Contact
Kathleen Thys
Kathleen Thys

Watertorenstraat 35, 2250 Olen

Phone 014 24 33 57
Send e-mail